i am new to this motor swapping thing and having problems. i have a 94cx with a 8valve 1.5 ltr in it and swapped it for a d15b7. The d15b7 had a intake and a distibutor and a throttlebody with a map sensor and broken tps sensor. The problem is it wont rev very high and the tps sensor is throwing a code. Ive tried aftermarket tps sensors with no luck.i ordered a used throttle body and a ecm from a 93 civic dx but it has no map sensor provision. HELP what do i need to make this work

Take you TB with the TB position sensor to a mechanic. The sensor needs to be calibrated to work properly. The problems you are describing point right to a incorrectly installed TPS. I would use the one from the old motor as it is OEM and is normally better than an after market replacement, as long as it is still good.