I have a 2000 civic dx and i had to convert the front end to a 96-98 front. The reason i done that was because i had a 96 and bought a seibon carbon fiber hood,headlight,grille and front lip and then sold the car and kept the parts so i wanted to use them instead of buying everything new again. My question is Im wanting to put some fog lights in but they dont come with directions. I looked up assembly and seen that the 99-00 has a plug under neath the steering column but didnt know if 96-98 is the same. Do they hook up the same way or is there a difference. Does anyone have directions on how they hook up. Every set I have looked at dosent come with direction from ebay. Thanks

YOU COULD FIND A 12V HOT (WHEN KEY IS IN ON POSITION) ON YOUR (FB) FUSE PANNEL RUN A GOOD GAGE WIRE TO A 12v TOGGLE SWITCH TO YOUR FOG LIGHTS

so all i got to do is find a postive when the key is on in the fuse panel under dash then tie both fog lights into it. What else is required to the install. I have never done anything like this so I dont want to buy them and not be able to hook them up. thanks

http://www.wikihow.com/Install-Fog-Lights CHECK OUT THIS LINK IT SHOULD HELP YOU

DID THIS LINK HELP YOU AT ALL.. YOU'LL ALSO NEED A MULTIMETER OR A 12v TEST LIGHT TO FIND YOUR 12v HOT

I have a test lights and a multimeter so if the fog lights dont have the plug I will just find a hot under the dash a use that. Yes that site shows me how to do it Thanks alot

I USED TO HATE WIRING, BUT IT' CHEAPER TO LEARN HOW TO DO IT THAN TO PAY SOMEONE, AND WITH THE PROPER TOOLS IT MAKES LIFE EASIER.

It don't bother me to do wiring im just havent done hardly any wiring so Im afraid of messing something up but im going to give it a try because I want to learn so i can get better. Thanks for the help.