i have a b18b that is fully rebuilt includeing: b16 pistons (11.2.1 compresion), all new bearings,new water pump, oil pump, polished ls rods, eagle block guard, and arp head studs. i also have intake, header, exhaust, and a fuel pressure reg. i just prchausd a full nos brand "wet" nirouse kit. my goal is a 75 shot. can it be done with my current build? or what parts should i get to achive that goal? im very new to nirous but i was hoping someone on here could shine some light on in. thanx

yo you need to get a tune a.s.a.p. and some engine management cuz with the higher compression there is less room for error...you could probably pull off a 50 shot with out a tune but anything higher get it tuned with something...

i can do that. ill get a chipped ecu and have it tuned. is there a way that i can have the ecu stock when the nirous is off and then change the settings when i am in the spray?

depends...like if you tune it with a s-afc or something like that, you can have two saved files, one that has the tune for all motor and one that has the tune for nitrous...

if you have hondata which is what i have, i have a certian rpm, throttle, and speed set so when i arm the system and all those parameters are set, it automatically retards the ignition timing and switches over to my nitrous fuel map...thats the best way to go is through hondata