yo whats going on guys im new to this forum and had a few question for someone more familiar with a mild street/strip set up.first let me start off by telling u what i already have.the shell is cx the lightest model hatchback have si rear disk brake setup with slotted and drilled rotors front and back,the motor is a 1998 b18b1 with a 1995 gsr tranny.has short ram intake,ebay 4-1 headers,"hp racing" exhaust,light weight fly wheel and crank pulley.so pretty much i got all the basic shyt out of the way i wanted to start to get serious and possibly do the cam's and cam gears.dont want anything too crazy for right now though so i wanted some recommendation's for cam's and cam gears that will give me a noticeable increase in power with having to replace too many things any help will be appreciated thanks in advanced.

So you're asking what cams to run on your LS?

I say Crower 404's, crower valve train (springs/retainers), Skunk2 or Crower cam gears, and a good tune. I would tune on Crome since you dont really need all the features of S300 or Neptune RTP

If your looking at cams i would consider upgrading intake mani as well.

thanks,i was planing on going with the crower cams and cam gears I've seen a couple threads in here with ppl going with crower seems like a good bet.as far as the intake manifold any suggestions on brand?i'm assuming it should be a skunk2? and where could i order them from?because there going for pretty expensive on ebay

check all different types of honda forums. people are selling used ones for kinda cheap

skunk2 pro if you got the cash, otherwise the blox or old skunk2 intake manifold.