Ok so I don't have alot of experience with integra just civics I own a 93 EG with a obd1 b18a1 in it
I am planning to trade my shell for a 96 integra shell because I just love integras and have always wanted one... My question is can I just swap my b18a straight into the 96 teg without any problems or am I going to run in to some problems? I am planning on trading this kid in the next few days but don't want to if I am going to have issues... Any help and advice would me awesome... I have searched and can't come up with and answers... So please help... Thank you in advance.

a 96 teg is obd2, so you will need to get a obd2 distributor, obd2 alternator and a obd2 to obd1 ecu conversion harness to run your obd1 ecu...or you can just get an obd2 LS ecu

Couldn't I just get the obd2 to obd1 harness and make the car obd1? But my motor will just drop in with no problems right I won't have to change mounts or anything?

well the harness on a obd2 integra has a different plug for the dizzy and the alternator as oppose to obd1. In reality the car will still be obd2 but the harness will make you able to run an obd1 ecu so you could use any engine management system if you so choose...and yes the motor will bolt right in

Dont forget about the crank sensor or you can bypass it

Sorry it took me so long to get back on here. just wanted to say thank you to u guys that replied. I ended up not getting the teg and im just gonna keep my motor in my EG. I just love my EG to much and have put way to much work and time into it to just give it up.