whats up guys new to the forum my name is clark

i have a d16a8(dohc zc) and im rebuilding it from bottom up im gonna be runnin a 12to1 cr with a 76mm p29 and cbr itbs on a custom plenuum but im wondering what is the best cam for my all motor setup looking for good bottom mid power

i also dont know alot about cam duration and lift can ya explain for me

also look at these:
http://www.gude.com/Cams/cam_acura.html
http://www.webcamshafts.com/

check http://www.wallaceracing.com/cambasics.htm
it explains about duration and lift or just google it for other helpful site.

if you dont want too crazy of a lift, exospeed has some good cams and you can still make good power from them. Their sr909 a6 cam is their most popular, I have their stage 3 but havent installed it ye. Bisi has good ones also, and Will from exospeed.

It all depends on your goals and how you are going to be mostly driving the car... I would go with a company that has actually done R&D on that particular engine.. Alot of companies just use the same profile for many different engines.. If you go on their site and look, you will see the same profile for a v8 as you will for a 4 cylinder.. Thats not R&D. Thats putting money in someones pocket for really doing nothing for it.

Bisimoto does quite a bit of R&D on all of his profile he sells. He designs his camshafts and Web Camshafts grinds them to his specs. He can also design a cam for your setup. Most companies are just "Off the shelf" cams. Not all engines perform the same.

Exospeed also has some good profiles. It all depends on your style of driving

Its a waste of money to build a na dohc ZC cause the head design is terrible, now boost, they love boost.

hi shocwa,

i wantd to find out if the motor in your 90 is the stock motor or did you put in another d15. i need a ne wmotor for my 90sedan and am desiding on weather to go ls or put in another d motor. posibly upgrade to a d16. wyo?