here it is spring time!! and i have a shit ton of parts to unload i have accumlated over the years for my car, however im going in a slightly different direction this year. i can be pretty flexable on price cause in order to to get my car rolling again i need to sell these parts.. please PM or email me at
xunchicrewx@gmail.com if you have questions. thank you!!
*JDM Honda P8R Non-Vtec Head Worked by Port Flow and SuperTech Springs and Retainers. This head has 0 miles and flows similar to a vtec head. Port & Polish, Polished Chambers, Valve Work. For the price im asking your basicly getting the head for free with the amount of work done!!
$1300.00 shipped
*NIB Memoryfab S68 Carbon Seat. This seat was one of mine i never mounted as you can see its still in the plastic. Our carbon s68s are on back order currently!! [b]425.00 shipped
*NIB Innovative DC/EG B or D Series Hydrolic Trans Replacement Mount Kit
part number 10150 and urathane stiffness is 60A
$300.00 shipped
*NIB Professional Products 68mm Type R Satin Throttle Body
part number is 69067 and comes with the TB gasket
$145.00 shipped
*SRR DOHC B16/B18 Adjustable Cam Gears in andonized purple
PENDING !!
*NIB ARP B18 / B20 Head Studs
part number 208-4302 comes with all hardware
$125.00
* NIB BLOX B18A/B20 Performance Intake Manifold
part number BXIM-10200
$175.00 shipped
* Crower Non-Vtec 404 Cam Shafts with AEM True Adjustable Cam Gears
used 10k miles if that.. Stage 3 - 3/4 Race, 1100 to 8200+ rpm, lope at idle.
Springs required. (18-21 hp) part number 62404-2
$300.00 shipped
* NIB BLOX B-Series Blue Cam Seals.
part number BXAC-00402-BL. price is for both...
$30.00 shipped
* NIB P2R B18/B20 Thermal Intake Manifold Gasket and Hardware
part number 104
$35.00 shipped
* NIB OEM Honda B18B/B20 P8R Head Gasket
part number 12251-P8R-004
70.00 shipped
* B18B / B20 - P75 Chipped(uberdata/crome) ECU unit
this ecu was tuned for the crower cams above, the redline has been raised and the idle has been tuned as well as the fuel map.
75.00 shipped/[b]
* NIB Memoryfab EG/DC Driver Side Low Position Bottom Mounting Seat Rail
this was also an item from my personal collection that i never used. rail can be used with any bottom mount seat as well as OEM recaro seats [b]$165.00 shipped
* Kirk Racing EG Civic Hatchback 4 Point Roll Bar
i personally painted this item flat green, has some markings from tires being loaded in and out, does not compromise the roll bar. rather heavy so pick up would be awesome!! only pic i have.. its still in the car
425.00shipped
*Buddy Club Spec II Exhaust(full cat back) 13 odd pounds of loudness and fury!
comes with silencer, however its still on the car and i wont be taking it off until i replace it first, and ill post pics then
400.00 shipped_____________________MAKE OFFER SECTION!!________________________
* Skunk2 look alike Muffer/axle back section
this item came on my hatch when i got it 4 years ago, no signs of rust except the hangers and the weld that fell on the muffler section.
*OEM B-series Clutch and Pressure Plate. This was taken out of my LS trans with about 30-40k miles but still has life left!!
*OEM 96-00 Civic EX Front Seats
these have been sitting in my garage for 5 years! just come pick them up.. IDGAF!
*OEM Honda 92-95 Side Mirrors
taken off my hatchback and replaced with spoon like mirrors..
ive been a member on Honda-Tech for years under the user name spock_rocker if any of you need vouches. again if anyone has any questions ill be more than happy to answer and i can be flexible on prices but please
NO LOW BALLERS!! the memoryfab products are mine(work for the company) and i only have 1 of each. thank you for viewing!!
