Hey guys,

Ok so i took off my MSD 6AL Ignition box of my RX-7 and installed it on my 98 Acura Integra, and I cant get it to start.
Running: MSD 6Al, and Stock Dizzy

Wiring is as follows for MSD:
Heavy Red to pos terminal on batt.
Heavy Black to neg terminal on batt.
Small Red to 2 black/yellow inside dizzy
White trigger to white/blue inside dizzy
-Black and +Orange to - & + of internal coil inside dizzy

everything is wired tight and right as far as what is stated above, car will crank but not start. MSD told me i needed a MSD 8910 EIS Adapter???
Please help me out guys thanks

I can't answer your question. But does your set-up require the msd ignition. I know the stock dizzy is good enough for 300hp+ & some people say even 500hp. What are your mods? If all you have are bolt ons there is no performance reason to put it in your car.

Trying to run a 2-step and my goal is 400+

this is just my opinion...ditch the MSD stuff and stick with OEM, it will save you a lot of hassle in the long run...if you want to upgrade you stock ignition, get better plugs and wires. Thats really all you need...unless you have a strict drag car running 800+hp