ok how much boost u think i could put to it on stock sleeves? any reason why u dot advise a block guard? just wondering. anyother suggestions on cams then?

how much boost depends on the tune.

there's a debate over block guards. some say their benefits are negated by the blockage of free flowing coolant. it's up to your decision.

on cams, i'll go for the crower 402-t's.

ok and would the stock distributor be ok??? and is there any other things that i have not covered that u can think of? thanks again.

idk the exact numbers, but its been addressed that the stock ignition holds fine up to a couple hundred horses.

what mods you have right now in your engine?

nothing yet im trying to figure out what all i need to do to it. i have it completely torn down and researching what all should be done.

k, i work with fjdistributors.

we're at the sponsor's arena in this site.

check us out at http://www.fjdistributors.com

we can help you with your build.

eddie@fjdistributors.com

i checked out the site couldnt find the sponsers area??? but anyway i checked out some things and kinda made me a base setup and wanted to see if i was going in the right direction, and yes if this will work i plan on buying this stuff im not one of those guys that are just pumping u for info i truely do thank u for helping me.

Skunk 2 intake
B18 Hbeam Connecting rods
Honda Kms Block guard( just for now until i can find someone to do my sleeves and i cant really afford that at this point anyways?)
Kms b18 racing valves
silicon bronze valve guides
couldnt find the right valve seals(must have overlooked them)
Kms Titanium retainers b18 non vtec
Kms race valve springs

Hasport level 2.9 axles( need info on this im not sure these will fit my application, i got a 94 4 dr civic with b18a1)

Skunk 2 pro series adj cam gears with the 402-t cams.

well thats what i got so far if i got anything wrong please let me know. ThX a lot

actually it's Sponsor Arena. my bad.

i'll check the list and let you know via pm.

thanks for counting on fjdistributors!

eddie@fjdistributors.com

you do not need the block guard man, that's just wasted money. not to mention its going to need to be installed by a machine shop.

reason i says its a waste of money... piston/rod B16 made 340 on stock sleeves with now block gaurd. I'm sure you'll be fine without it.

ok ur the second guy that advised against it so i wont do it, what is ur opinion on the list. i need help on pistons that will work with those rods.

And also do u guys carry the crower 402t cams for it??? Thanks again

we can get them for you.

i personally agree with 4dr concerning the blockguard, but it's available if you still want it.

also we're distributing bisimoto engineering products. we're still working on their catalog but i'm pretty sure he makes turbo cams for b engines with matching springs and retainers.

i need your zip code to get you the shipping costs.

57717

What brand are the rods you wanna run? A lot of locals here inu Kansas City just run CP pistons on Eagle rods. Pretty cheap combo.

Yeah down in ga we run the same combo or weisco, je, srp, or probe pistons with eagle rods. I would recommend supertech valves, retainer and springs or crower valvetrain.

ok thanks i was llooking at the crower valvetrains, are they better then the kms? and if i went with cp pistons and eagle rods how much power would i be able to get out of it on like 14 lbs of boost u think?

and an other thing, where shold i go with ignition? do i need an FMU or i was told that if u use injectors larger then 450cc that its not needed. should i get an aftermarket fuel rail? and what fuel pump should i use but not spend to much on?

will 370cc injectors be enough? who makes aftermarket rocker arms?, or do i stick with stock ones??? all or the valvespring and retainer packages i find none of them have valve keepers in them do i stick with stock there to? anything helps thanks again???

hey sorry i haven't pmed you a quote yet, but these days we were involved in a big presentation of our store at a important event in the island i come from...

i'll have it ready for you in a couple of days.

ok no probs anyone else got any suggestions for me????