What would be a good setup so i could outrun a d16z6 with no problem?

Stock z6? Built? Boosted? A stock Ls should outrun a z6.

Anything over 2.0L should be able to walk it!

F22's are a pretty cheap swap.

But im building a B7 SOHC non vtec. Not a DOHC.

Sorry about that. You never mentioned what engine you were building, just that you wanted to beat up on a little 1.6L D16Z6. I didn't correlate the B7 in your user name with your engine of choice. Boost your D15 that should help!

FYI the F22 is not only a DOHC. There are 7 SOHC versions of the F22.
F22A1, F22A4, F22A6, F22A7, F22B1 (VTEC), F22B2, and the F22Z2 (VTEC).

Yes i know all about the f motors I had a f22a1. Comes stock in a Accord, and it was slow as fuk. Ive heard you could use other parts from other motors to put in my b7 but i have no idea what parts to use.

50 shot of nitrous, bolt ons, and a good tune and you will walk most z6's even some turbocharged ones.

lol.....Not near as slow as an 85-90whp B7 though.

Do yourself a favor, drop the boat anchor B7 and get yourself a real engine to put money into.

Accords are for pussys. Thay were not made for sports. Civic, CRX, Del Sol, Prelude were made for sports. Thats why every1 does a h22 swap in accords. Look it up a stock B7 has 102whp jackass.

What type of racing are you doing?

Sorry 102......yeah that's crank'n isn't it

Yeah I guess you are correct the CD6 SiR and the Euro R Accords are for getting pussy. They came stock with an H22A & H22A7. Your B7 is for zit popping preemies with sand in there vage.

Get real, you have a engine that isn't even worth it's weight in salvage.

If you have a b7 and you want some good power, start with your top end. Get a z6 head with a y8 im. A stage 2 cam will work on a stock block. Screw in some ARP rod bolts to your stock b7 block. Put it all together with a mild head port and a thinner headgasket. Also get an adjustable cam gear and retard it by about 1 to 2 degrees.
You will get some decent horsepower. You should be able to walk stock b18's easily. Expect around 140ish WHP.

I pulled the B7 out and bought a B20b, and a B16 LSD tranny. The B20 was shipped from Japan and it came with ECU and harness for only $499.00. This was all after i broke 3 pistions, 4 connecting rods, crank, and blew 3 holes in the paper thin block, and a huge dent in my firewall. With the setup im gonna run i WILL walk any accord.

Sure thing, sounds like your off to a good start! Let me know when you learn to build an engine that doesn't blow up.

Bitch the B7 was stock. The b20 with bust ur lil accords ass.

B20s are great engines. They have excellent torque curves. You can get up to 160ft/lbs of torque if you bore out your block to 84mm. A d16/d15 has around 100ft/lbs of torque, in comparison. Your launches will be a lot more powerful.

^ lol...i love too how the site admin is just making typical conversation

f series motors are not gay...if you think they are check out bisimoto's website and you will think twice

and you cant really say who will beat who until you two were to actually race...even though accords were not the sportiest hondas, they can move with the right parts i have seen personally

the thing i hate the most is ppl saying that ppl will WALK so and so blah blah blah...ill believe it when i see it, until then quit the shit talking this is not a pissing contest