whats up, my names james, i live in summerville, sc. i own a 98 EK hatch. i'm relatively new to the honda scene, i'm just doing what i can to learn as much as possible and have fun. i just recently picked up a b18a1 tore it down to find out its got 4 bent valves and a spun rod bearing so i decided i'm gonna build it completely and boost it, i just don't know where to start. this is not going to be a weekend project by any means, im shootin for it to be in another EK hatch in about two years. so if anyone has any input about what i should do first i would greatly appreciate it

Welcome to the site james. My advise build the bottom end first. pistons rods bearings...all that good stuff. Have your crank ground and balanced and ten run a T04B 60-1 with some new 550cc injectors and you should have something that will spanks Stangs if tuned properly. Stay within compression ratio of 9.0:1 - 9.5:1.