NonVtec Honda Forums • View topic - NON-V WHP REGISTRY

MADHACK3R · **Posted:** Tue Jun 30, 2009 6:46 pm

Is there a dyno-proven WHP registry for non-vtec builds?? I wanna see where the miracle-motors are and who built them.

MADHACK3R · **Posted:** Thu Jul 02, 2009 1:15 am

So no1 dynos on this board or is every1 gun-shy of posting it up? LOL

MADHACK3R · **Posted:** Mon Jul 27, 2009 5:44 pm

Ok - my 2l N/A B18A made 168hp and 127tq (short-ram FTL) @ just over 9k RPMs on a conservative tune. This is with crower 403s zeroed out (no angle changes) and some tired cold nitrous plugs. Will retune w/ 404s, NGKs, shortly and add cam angle changes. Also getting my header primaries corrected before the tune. LS tranny (FTL) and 2 primaries on my header pinched b/c I'm a ricer - LOL. Kthnxbye

mild2 · **Posted:** Sat Nov 07, 2009 12:14 am

still some good numbers even with a pinched header. lol.

Integraguy04 · **Posted:** Sun Nov 08, 2009 5:26 pm

i had a ls with scat rods, je pistons (9.5:1), crower valvetrain, stage 1 crower cam, I/H/E and on a 75 shot...made 148whp and 121tq off nitrous, made 200whp and 180tq on nitrous

Dntnedvtec · **Posted:** Sun Oct 03, 2010 8:13 pm

P8R head W/ LS cams and valve springs)
Type R IM
LS block, rods, crank w/ PR3 pistons
Injen Intake
Kidd racing Narrow B header
18'' 2 1/2 pipe, 3'' midpipe to tip
tuned with crome

made 143 whp 115tq

LsCivic · **Posted:** Tue Oct 05, 2010 5:41 pm

403's, p75 head and i/m, eagle rods, supertech pistons, t3 t04e 60-1, tuned by me on crome on 15 psi was 375.

I went 11.493 @ 125.xx with a 1.85 60ft.

NON-V WHP REGISTRY

Who is online